Smart TV connection tips

Running into trouble getting your smart TV to connect to your 360 WiFi network? To get your entertainment center up and running, there are several things you can check in your TV settings, WiFi equipment, and network setup.

1. Double-check your WiFi password. Remember, passwords are case-sensitive. Test another device using the same password to make sure.
   
   
2. Restart the SmartNID and WiFi pods. Refresh the equipment by unplugging from power, waiting 2 to 3 minutes, then plugging them back in. This can resolve sluggish network issues as well as connectivity issues.
   
   
3. Check WiFi pod placement. This might be necessary if your TV is far from the nearest pod and the signal is being blocked. 
   
   
4. Check your WiFi network. If other devices are also not connecting, then troubleshoot your 360 WiFi setup. If you do have other devices connected to your WiFi, then you know the network is working and the issue is with your TV specifically. Continue to the next section.

1. Restart your TV.  Turn it off, wait a few minutes, then turn it back on.
   
   
2. Check the location setting. In the TV settings, make sure the location is set correctly (zip code/country). The wrong location setting could prevent the connection to WiFi.
   
   
3. Update TV software. Out of date TV software or firmware can cause connectivity issues. If you can't connect the TV wirelessly, then you may need to connect your TV by Ethernet temporarily to enable updates. You may need to consult the manufacturer instructions for details. Once the software is fully updated, you can try the WiFi connection again.
   
   
4. Reset your TV. In some cases, an unknown setting in your TV may be the cause of the issue. Doing a full reset will delete all configurations such as sleep timers that may be affecting your WiFi connection. You may need to consult the manufacturer instructions for details.